Please click “Shared” below to access all the latest software files required to perform a complete OP2 software update. These files are intended for on-site use only. The software file names for uploading to units and group controllers are as follows: 


Exact File NameVersionSW Description
Autorun.ap1
V2.06Unit controller update file, along with HTTP below (5,465,986 bytes under file properties)
HTTP (after extracting all or unzipping all files)
V2.05OP2 unit web update file
HTTP (after extracting all or unzipping all files) 
V2.05OP2MUC web update file
Updata_OPTIMA2_FY-FE010_V21B09_20260420-1.fpg
VB09
Newest standard OP2MUC.AC.L: 
10-inch
touchable screen display software
Updata_OPTIMA2_FY_FE6070C_V1.3_20250624-4.fpg
V1.37-inch touchable screen display software

 

Click: Shared


Please refer to the steps for the Local Software Update in Chapter 4 of the latest OP2 Operation Manual (OM). 

https://support.airsysnorthamerica.com/en/support/solutions/articles/6000269699-optima2-installation-manual-and-operating-instructions


Note:  The HTTP files for any individual unit and a group controller are differernt. Please download the corresponding HTTP for both the unit and the group controller, if applicable.


Last update: 07/2026